TRUaire 103M Series Stamped 3 Way Sidewall and Ceiling Registers
103M Features :
- Stamped louver in 3-way airflow pattern
- 1/2" spaced with 45 deg blade angle
- Single lever operated multi-louver shutter
- Counter-sunk screw holes with 2" screws provided
- Finished with white powder coating
Sizes listed below are LIST SIZES -- opening size. A 12x12" LIST SIZE grille frame will slide into a 12x12" drywall opening. The actual outer size of the grille frame is larger.
|Do you have questions about the products on this page?
Click on the ? image on the left or this link to ask us your questions!
|#1||Q: How do I measure to get the right fit
A: Measure the size of the hole/opening. If you measure 12x12 then get a 12x12 list size grille. A 12x12 LIST SIZE grille frame will slide into a 12x12 drywall opening. The actual outer size of the grille frame is larger. CALL US IF YOU ARE NOT SURE. 877-711-4822
Asked on 2016-12-11 by Luis
|#2||Q: I have a 3 way vent grill which fits into a ceiling hole that is exactly 9 1/2 and 7 1/2. The exterior measurements are actually a little more than 9 1/2 and a little more than 11 1/2. Which model of vent would I need?
A: These Truaire units are actually 1/2 smaller than the listed size where it goes into the wall, so the 103M would be a fine choice.
Asked on 2013-11-24 by Villegas
|#3||Q: I have a vent with inside measurement of 5½ and 13½. That is the ceiling hole would have to be that size. The louver handle is broken off. What size vent would I need and would it screw into the frame already installed?
A: In this series a 14x6 would fit.
Asked on 2013-11-10 by Jerry M
why buy from us?
We're engineers passionate about home ventilation and serious about customer service – so you can count on us for carefully-selected equipment and expert advice to ensure your project is a success from specification to installation.
Your call is answered by qualified people who will gladly discuss your project in detail, advise you professionally and never sell you inappropriate products.