Spring Loaded Backdraft Dampers
Backdraft dampers. Constructed from galvanized steel for the collar and lightweight aluminum for the damper blades. Spring loaded for positive closure.
Can be mounted horizontally or vertically -- horizontal or vertical (up) airflow. The collars are undercut 1/8" to fit duct (12" size is 1/4" undercut).
|Do you have questions about the products on this page?
Click on the ? image on the left or this link to ask us your questions!
|#1||Q: Could you use on dryer vent?
A: Not recommended. In general, any backdraft damper with a center pivot is not recommended as they tend to collect lint there.
Asked on 2016-12-03 by Jim
|#2||Q: Is there a noticeable reduction in air flow, specifically if I use two?
A: You can expect a slight increase in static pressure, but it is almost negligible when using a high statich centrifugal fan.
Asked on 2014-03-14 by Jeff S
|#3||Q: What is the temperature rating for this product?
A: The top rating for this is 140 degrees F.
Asked on 2014-01-03 by Mike
why buy from us?
We're engineers passionate about home ventilation and serious about customer service – so you can count on us for carefully-selected equipment and expert advice to ensure your project is a success from specification to installation.
Your call is answered by qualified people who will gladly discuss your project in detail, advise you professionally and never sell you inappropriate products.