SteelCrest Bronze Series Custom Metal Grilles and Registers

The Bronze Series are the least expensive of the SteelCrest grille lines.  Available in Tuscan, Square, and Slotted designs, in most standard sizes, and in four popular finishes. Manufactured from 18 gauge stamped steel. 

These decorative registers and grilles are easy to install and ready when you need them. They also typically cost 40% less than most custom registers on the market.

3 WEEK STANDARD PRODUCTION.  No expedited production available.

1
Adjust Grille Parameters
 
 
  ** The LIST length and width (height) are the size of the OPENING. The actual overall dimensions will be 2 inch larger in both length and width.  
 
 
 
 




Selected Design: SteelCrest Grille Design Selected Color:
2
Pricing and Model#
3
Purchase
Note: SteelCrest products are made-to-order. They are NON-RETURNABLE. If you have questions, please call us at 877-711-4822 before ordering.
 Quantity:

Do you have questions about the products on this page?

Click on the ? image on the left or this link to ask us your questions!
#1 Q:   RE: Bronze series OBD. What color is the damper if a bronze or white supply register is ordered?
A:   The damper is always black.

       Asked on 2022-02-15 by Tammy
#2 Q:   Do the sizes for your return air grills (in particular, 12x24) measure the grill or the opening they go over?
A:   The LISTED length and width (height) are the size of the OPENING they go into. The actual overall grille dimensions will be 2 inch larger in both length and width due to the flange that surrounds the opening.

       Asked on 2021-01-10 by Tim
#3 Q:   Good morning, In the pull down list of sizes for supply diffusers, they are all listed as having OBD. I take that to mean we wouldnt need to add a concealment louver? Also why are they called residential? We need these for a commercial lobby project.
A:   The damper will offer partial concealment, especially when not fully open. All supplies come with the damper. Typical use is in residential construction but they can be used anywhere.

       Asked on 2016-09-28 by Deborah

Related Products

SteelCrest Silver Series Custom Metal Grilles and Registers

Six designs from contemporary to traditional. Five finishes. Laser cut from 1/8-inch thick steel (11 gauge). Supply grilles include an air control damper. MADE TO ORDER.

SteelCrest Gold Series Custom Metal Grilles and Registers

Huge selection of designs and finishes!. Laser cut from 1/8-inch thick steel (11 gauge). Supply grilles include an attached air control damper. MADE TO ORDER.

 

why buy from us?

We're engineers passionate about home ventilation and serious about customer service – so you can count on us for carefully-selected equipment and expert advice to ensure your project is a success from specification to installation.

Your call is answered by qualified people who will gladly discuss your project in detail, advise you professionally and never sell you inappropriate products.