Advector inVENT Manual Registers and Transition for New Construction
REGISTER: If you are looking for a low cost and energy efficient option to increase the comfort level provided by your HVAC system then the manually adjustable inVENT might be just what you need.
The manually adjustable inVENT for New Construction was developed for simple installation in any new build project. When used with the available inVENT Duct Transition, home builders also get the benefits of an insulated register box and integrated mounting rails.
Using aerodynamic principles to promote 360 degree airflow distribution, the manually adjustable inVENT provides for more comfortable and balanced feeling temperatures. It also has a full range of motion between the open and closed position allowing you to decide how much conditioned air is directed at each room.
TRANSITION: Finally a duct transition with integrated mounting rails for simple and efficient installation! Just extend the mounting rails to the proper size and secure the inVENT Duct Transition in place. The inVENT duct transition was designed specifically for use with the inVENT for New Construction but can be used in any application requiring the transition of an 8 inch duct to circular opening.
Performance Data
| Closing Plate Position | CFM Flow Rate | 50 | 100 | 150 | 200 | 250 | 300 | 350 |
| Fully Open |
Static Duct Pressure | 0.05 | 0.09 | 0.14 | 0.22 | 0.34 | 0.57 | 0.73 |
| Duct Diameter | 8in | 8in | 8in | 9in | 9in | 9in | 9in | |
| Noise Criteria | - | 19 | 27 | 34 | 42 | 50 | 62 | |
| Horizontal Face Velocity | 620 | 1180 | 1520 | 1900 | 2320 | 2733 | 3125 | |
| Horizontal Throw | 7 | 16 | 22 | 32 | 41 | 51 | 58 |
Product Specifications
Base Diameter: 10.4in
Profile height at full open: 1.6in
Profile height at full close: 0.9in
Weight: 0.6lbs
Primary Material: ABS Plastic
Surface finish: white, textured
Manufactured in: United States
Performance Notes
Airflow is in cubic feet per minute.
All pressure is measured in inches of water.
Duct Static Pressure is based on 8inch and 9inch duct sizes as indicated
Face Velocity is in feet per minute
Horizontal Throw is calculated based on 50fpm air velocity and 360 degree distribution pattern
inVent cfm rate can be fully controlled by closing and opening of the Closing Plate
The Noise Criteria values are based on a room absorption rate of -10 db, referenced to 1pW and one inVENT
Related Products
Advector inVENT Manual Registers and Transition for Remodelling
Replaces most metal HVAC vents currently installed in your home. The manually adjustable inVENT reduces HVAC draft and noise levels.
why buy from us?
We're engineers passionate about home ventilation and serious about customer service – so you can count on us for carefully-selected equipment and expert advice to ensure your project is a success from specification to installation.
Your call is answered by qualified people who will gladly discuss your project in detail, advise you professionally and never sell you inappropriate products.
