Advector inVENT Manual Registers and Transition for Remodelling
The inVENT for Remodeling was developed for simple installation and to replace most metal HVAC vents currently installed in your home.
The specially engineered design and carefully selected materials make the manually adjustable inVENT perfect for reducing HVAC draft and noise levels. Using aerodynamic principles to promote 360 degree airflow distribution, the manually adjustable inVENT provides for more comfortable and balanced feeling temperatures. It also has a full range of motion between the open and closed position allowing you to decide how much conditioned air is directed at each room.
Most homes can be outfitted with the manually adjustable inVENT for only a few hundred dollars and in less than a few hours…making it a smart and simple method for increasing your HVACs effectiveness and your home’s comfort level.
Performance Data
| Closing Plate Position | CFM Flow Rate | 50 | 100 | 150 | 200 | 250 | 300 | 350 |
| Fully Open |
Static Duct Pressure | 0.05 | 0.09 | 0.14 | 0.22 | 0.34 | 0.57 | 0.73 |
| Duct Diameter | 8in | 8in | 8in | 9in | 9in | 9in | 9in | |
| Noise Criteria | - | 19 | 27 | 34 | 42 | 50 | 62 | |
| Horizontal Face Velocity | 620 | 1180 | 1520 | 1900 | 2320 | 2733 | 3125 | |
| Horizontal Throw | 7 | 16 | 22 | 32 | 41 | 51 | 58 |
Product Specifications
Base Diameter: 16.2in
Profile height at full open: 10.4in
Profile height at full close: 1.7in
Weight: 1.1lbs
Primary Material: ABS Plastic
Surface finish: white, textured
Manufactured in: United States
Performance Notes
Airflow is in cubic feet per minute.
All pressure is measured in inches of water.
Duct Static Pressure is based on 8inch and 9inch duct sizes as indicated
Face Velocity is in feet per minute
Horizontal Throw is calculated based on 50fpm air velocity and 360 degree distribution pattern
inVent cfm rate can be fully controlled by closing and opening of the Closing Plate
The Noise Criteria values are based on a room absorption rate of -10 db, referenced to 1pW and one inVENT
Related Products
Advector inVENT Manual Registers and Transition for New Construction
Simple installation. When used with the available inVENT Duct Transition, you get the benefits of an insulated register box and mounting rails.
why buy from us?
We're engineers passionate about home ventilation and serious about customer service – so you can count on us for carefully-selected equipment and expert advice to ensure your project is a success from specification to installation.
Your call is answered by qualified people who will gladly discuss your project in detail, advise you professionally and never sell you inappropriate products.
