Seiho SFZ and SFZC Series Louvered Dryer Vent Caps

Designed for exterior applications, the SFZ and the SFZC are easy to install and have large openings to reduce clogging. Both models are suited to exhaust fan applications such as dryer, bathroom, or kitchen exhaust venting. The heavy-gage anodized aluminum and stainless steel construction is corrosion-resistant for years of service.

Features:
- Large free area reduces clogging
- Made from machined anodized aluminum
- Designed for weather resistance
- Water condensation drain

*** LARGE QUANTITY IN-STOCK ***

model description usually ships price QTY
SFZ 4 Seiho aluminum DRYER vent cap. Clear anodized. 4 inch size. 1 Day. In-stock $26.60
SFZ 6 Seiho aluminum DRYER vent cap. Clear anodized. 6 inch size. 1 Day. In-stock $56.10
SFZC 4 Seiho aluminum DRYER vent cap. Clear anodized. With backdraft damper. 4 inch size. 1 Day. In-stock $40.00
SFZC 6 Seiho aluminum DRYER vent cap. Clear anodized. With backdraft damper. 6 inch size. 1 Day. In-stock $78.10
add to basket

real-time shipping quotes are available before checkout on your shopping cart page

seiho sfz

seiho sfz

seiho sfzc

seiho sfzc

 

Stocked in both Oregon and New York state. See transit maps below.

Some products might ship from multiple warehouses.

Do you have questions about the products on this page?

Click on the ? image on the left or this link to ask us your questions!
#1 Q:   Is the SFZC4 acceptable for venting a gas dryer? Or does the backdraft damper cause too much pressure loss? Is it an actual backdraft damper, or a simple flapper damper?
A:   Yes, these are acceptable for residential dryer venting. The backdraft is a flapper so the pressure loss is much lower than a multi segment damper.

       Asked on 2020-08-23 by Greg
#2 Q:   If mounted under an overhang such that the damper is horizontal to the ground, will the damper open with air flow from the dryer? And will it close when dryer air flow stops?
A:   No. This cap is meant for a vertical wall installation. The damper will not operate properly in a horizontal installation.

       Asked on 2018-12-30 by Russ
#3 Q:   Two questions, is it easy to remove the hood after it is installed as to be able to clean the dryer line, since this dryer line goes through an interior wall then to the outside. Also are the Louvers easy to remove, as to get an air hose through the outside into the inside line of the Dryer for Cleaning?
A:   These have spring clips on the back that hold them in the duct by friction. To remove, just grab it and pull off. The louvers on it are fixed, so you would just remove the entire thing.

       Asked on 2018-01-09 by JT
#4 Q:   does this cap prevent birds from entering and making nests. I have a flap that they open with their beak and go inside. I need an opening large enough for lint to blow out. Old cage unit was always clogging up. vent is on 2nd floor. do you think this would work for me?
A:   This one in particular should keep them out because of the louver slots. The damper behind is quite nice and should keep everything else out.

       Asked on 2014-05-28 by John
#5 Q:   Ok to mount this vent cap to pvc pipe? Is the shaft with clips long enough?
A:   You may need to caulk it in, but there should be no other problems.

       Asked on 2014-04-25 by Kate

Related Products

Seiho SBP and SFBP Series Aluminum Dryer Vents with Backdraft Flapper and Tail Piece

For exhaust applications such as dryer, bathroom, or kitchen exhaust venting. With flapper damper and a rigid 8.6h long aluminum pipe attached to it.

Seiho RCA and RCC Series Stainless Steel Dryer Vent Caps

Made from polished stainless steel for durability. Designed for exterior applications in dryer, bathroom, or kitchen exhaust venting.

Seiho SX Series Aluminum Louvered Vent Caps

Perfect for any venting applications such as storage rooms, attics, basements, and bathroom and kitchen exhausts. Beautiful anodized aluminum finish.

Seiho SFX Series Aluminum Louvered Vent Caps With Hoods

Similar to SX series but with a hood. Perfect for any venting application. Beautiful anodized aluminum finish.

 

why buy from us?

We're engineers passionate about home ventilation and serious about customer service – so you can count on us for carefully-selected equipment and expert advice to ensure your project is a success from specification to installation.

Your call is answered by qualified people who will gladly discuss your project in detail, advise you professionally and never sell you inappropriate products.